Beschreibung
GT Pro Series Pro 24″ 2013
Beschreibung:
| Fahrwerk | |
| Rahmen: | GT Pro Series BMX Race Design, 6061-T6 AL, Euro BB, Reverse Dropouts, 1-1/8″ Integrated H/T |
| Gabel: | GT BMX Pro Race, 100% Cr-Mo 1-1/8″ Steerer, Tapered 31.8-28.6mm Blades, 320mm A/C, 3/8″ Dropouts |
| Dämpfer: | |
| Räder | |
| Felgen: | Alienation Deviant 32H Front, Alienation Runaway 36H Rear |
| Reifen: | Tioga Power Block 24″x 1.75″ F/R |
| Nabe vorne: | GT Mohawk Design, Sealed Bearings, 3/8″ Axle, 32 Hole, w/ Allen Thread in Bolts, AL Washers |
| Nabe hinten: | GT Mohawk Flip/Flop Design, GT Logo, Low Flange, 2 x Sealed Bearings, 3/8″ x AL Axle, 36 Hole, w/ Allen Thread in Bolts, AL Washers |
| Speichen: | 15G, Black |
| Antrieb | |
| Schalthebel | |
| Umwerfer: | |
| Schaltwerk: | |
| Kasette: | DNP 30 point x 16T |
| Innenlager: | |
| Kurbel: | GT Tubular Cr-Mo 2 Pcs, 175mmArms, 8 Splined Spindle With Single Pinch Bolt, Recessed Axle Bolt, 36t GT CNC AL Chain Wheel |
| Pedale: | GT Slim Profile Large Size Platform, PP Material |
| Kette: | KMC Z610 |
| Komponenten | |
| Sattelstütze: | SDG I-Beam AL 6061, 27.2mm |
| Sattel: | SDG Patriot, I-Beam Embossed GT Wing Graphic |
| Steuersatz: | |
| Vorbau: | GT 100% Cold Forged 1-1/8″ Machined GT Logo On Front Cap, 50mm Ext |
| Lenker: | GT Cr-Mo Interceptor 5.5″ x 27.5″ Rise Taper Cross Bar, 11 Back x 3 Up |
| Griffe | GT Wing Waffle Design 130mm |
| Bremsen vorne: | |
| Bremshebel: | Promax Xl-91 Mini V-Type AL 2 Finger Lever W/ Reach Adjust |
| Sonstiges | |
| Farbe: | Black / Silver 2-Tone |
| Bike Gewicht in kg: | 9.3 |
| Weitere Auststattung: | GT Design CNC Machine Chain Tensioners |
